Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
Problem
The mini grinder will not
operate.
The motor is overheating.
Disc wobbles or vibrates.
MAINTENANCE
Remove the battery pack from the tool before carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication or maintenance. There are no user serviceable
parts in your power tool. Never use water or chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage your power tool.
7- Recycling / WEEE
Waste electrical products must not be disposed of with household waste. Please recycle
where facilities exist. Check with your local authorities or retailer for recycling advice.
Li-Io
Lors de la mise au rebut du produit, jetez le manuel d'utilisation selon les consignes de tri sélectif
ORIGINAL INSTRUCTIONS
Possible cause
Battery pack discharged.
Battery capacity is low.
Battery pack is too hot/cold.
Cooling vents may be obstructed
by dust or other obstacles.
The clamping bolt is not tightened. Tight the clamping bolt.
The disc is ill located on the
spindle.
42
SAFETY AND OPERATING MANUAL
Corrective action
Check the battery pack.
Charge the battery pack.
Allow to cool/warm.
Clean and clear vents. Do
not cover with hand during
operation.
Locate the disc correctly on
the spindle.
Publicité
