Publicité
Les langues disponibles
Les langues disponibles
6- Precautions for use
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction book carefully.
Intended Use
Use the Mini Grinder only for cutting, roughing and brushing metal and stone materials without
using water. For cutting metal, a special protection guard for cutting (accessory) must be used.
A1
A2
A3
ORIGINAL INSTRUCTIONS
ASSEMBLY
1. MOUNTING THE WHEEL GUARD
(SEE FIG A1-A3)
WARNING! Before undertaking any
maintenance, service, or changing a disc on the
grinder itself, remove the battery pack.
WARNING! For work with grinding or cutting
discs, the outer guard / protective guard must be
mounted. Use the correct type of disc for your
application.
- Wheel guard for cutting
Fix the outer guard / protective guard onto the inner
guard / wheel guard for grinding until it engages. The
wheel guard for grinding and outer guard / protective
guard assemble together and make up a wheel guard
for cutting. (See Fig. A1)
NOTE: Ensure the clip on each side of the outer guard
/ protective guard are latched onto the inner guard /
wheel guard for grinding.
- Wheel guard for grinding
Simply remove the outer guard / protective guard. The
grinder is ready to be used for grinding. (See Fig. A2)
- Adjusting the wheel guard
Turn the inner guard / wheel guard for grinding to the
desired position until it engages. No tool is required
for this. (See Fig. A3)
38
SAFETY AND OPERATING MANUAL
Publicité
