Publicité
Les langues disponibles
Les langues disponibles
4.5- Adjusting the main grip handle – only available on 230mm model (Fig.8+9)
The main handle can be pivoted by 90° to the left or to the right.
Press and hold the locking button (6)
Pivot the main handle to the desired direction
Release the locking button (6) to fix the main handle.
V. OPERATION
5.1- Intended use
- The product is intended for indoor (or under shelter) domestic use.
- The product is intended for grinding diverse types of materials (e.g. metals, marble...) by using the
appropriate accessory.
- Do not use the grinder for working on products containing asbestos or other toxic or hazardous materials.
- Do not use the tool for purposes not appropriate (eg cutting of products containing hazardous materials ...),
or for any use not described in this manual.
- The tool is not intended for commercial, professional, artisanal and/or industrial use.
- Do not use other types of disks other than those recommended by the manufacturer to avoid a hazard.
This tool will allow you to grind various types of materials: metals, marble, plaster, concrete and any other
derived material.
5.2- Operation
5.2.1- Switching ON (Fig.8)
1. Connect plug to power source.
2. Push forward the safety button (8) and then press on the ON/OFF trigger switch (7).
5.2.2- Switching OFF
To switch off unit, release the ON/OFF switch (7).
Note: when switch is released, the disc continues to rotate.
Wait until it comes to a complete stop before any intervention or before putting down the tool.
Note: once unit is switched off, never slow down the disc by applying pressure on its faces.
5.3- Tips:
- Do not apply to much force on tool that could slow down the disc.
- To trim in an effective way, use trimming discs at a 30° to 40° angle to the material.
- For grinding: work the surface in even circular motions.
Page 22 / 23
Publicité
