SIOUX SDR10A Manuel D'instructions page 3

MAINTENANCE
Water, dust and other airline contaminants can cause rust and vane sticking. For long periods between tool use, flush the tool with a few
drops of oil and run for 10 seconds. This will help remove contaminants and reduce the formation of rust.
Disconnect tool from air supply before installing or removing drill bit or making any adjustments
We, Sioux, Snap-on Power Tools, Inc., 250 Snap-on Drive, P.O. Box 1596, Murphy, NC, 28906, USA, declare under our sole responsibility that the
to which this declaration relates are in conformity with the following standard or standards or other normative document or documents:
May 1, 2009
Murphy, North Carolina, USA
Date and place of issues
WARNING
SOUND AND VIBRATION READINGS
*Sound Pressure
Catalog No. dBA
SDR10A Series 77.7
*per PN8NTC1
DECLARATION OF CONFORMITY
EN 792, ISO 12100-1, ISO 12100-2, ISO 8662, Pneurop PN8NTC1
following the provisions of
98/37/EC Directive.
Vice President and General Manager-Power Tools
Name and position of issuer
*Sound Power
dBA
89.3
*per PN8NTC1
products
SDR10A SERIES
Robert Hartman
3
*Vibration
m/s
2
Less than 2.5
*per ISO 8662
Signature of issuer