Electric Travel Kettle - SEVERIN WK-3648 Mode D'emploi

Electric travel kettle

Dear Customer,
Before using the appliance, the user should
read the following instructions carefully.
Connection to the mains supply
The appliance should only be connected to
an earthed socket installed in accordance
with the regulations.
The appliance is equipped with a voltage
selector which can be set to different supply
voltages. Always ensure that the selector is
set to the correct voltage.
This product complies with all binding CE
labelling directives.
Familiarisation
1. Water container lid
2. Operating button
3. Indicator lamp
4. Power cord
5. Storage bag
6. Cups
7. Voltage selector
8. Water container
Important safety instructions
●
Before the appliance is used, the main
body as well as any attachments fitted
should be checked thoroughly for any
defects. If the appliance, for instance, has
been dropped onto a hard surface, it
must no longer be used: even invisible
damage may have adverse effects on its
operational safety.
●
This appliance is not intended for use by
any persons (including children) with
reduced physical, sensory or mental
capabilities, or lacking experience and
knowledge, unless they have been given
supervision or instruction concerning the
use of the appliance by a person
responsible for their safety.
●
Children should be supervised to ensure
that they do not play with the appliance.
●
Do not leave the kettle unattended
during operation. Use only pure water
and always observe the minimum and
maximum level marks on the inside
container when filling. Overfilling the
container is potentially dangerous with
boiling water being forced out. Also
beware of the danger of scalding from
steam being emitted. Therefore, do not
touch any part of the appliance except
the handle during use.
●
The housing becomes hot during use.
●
Caution: the lid must be kept closed at
all times, both during the boiling process
and when pouring out hot water.
●
The appliance must be placed only on a
heat-resistant, level surface.
●
Do not allow the appliance or its power
cord to come into contact with open
flames or any hot surfaces such as hot-
plates.
●
Do not let the power cord hang free, and
keep the cord well away from hot parts
of the housing.
●
Always remove the plug from the wall
socket,
- in case of any malfunction,
- after use,
- during cleaning.
●
No responsibility will be accepted if
damage results from improper use, or if
these instructions are not complied with.
●
This appliance is intended for domestic
use only and not for commercial
applications.
●
In order to comply with safety
regulations and to avoid hazards, repairs
of electrical appliances must be carried
out by qualified personnel, including the
replacement of the power cord. If repairs
are needed, please send the appliance to
one of our customer service departments.
The address can be found in the
appendix to this manual.
Thermal safety cut-out
The preset thermal safety cut-out protects
the heating element from overheating
7