Pfannenberg X Serie Manuel D'utilisation page 107

ENG
4.6.7 Equipotential bonding
Fig. 18: Equipotential bonding
NOTE
Potential equalization provided by customer
If the device is to be integrated into the customer's existing potential equalization for EMC reasons, a conductor can be
connected at the connecting point of the function potential equalization.
The connecting point is labeled with the necessary circuit symbol.
Operating Manual | Attachment and Installing Cooling Units X-Series | Premium Controller – 230 V | 086100131
1 Equipotential bonding
reception with low interference between the unit and
the switch cabinet.
G00114
(M8 thread), for a signal
42/65