Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
WATER DRAINAGE
There are three methods to drain water from the air conditioner.
1. Drain Plug
When the internal drain pan becomes full the air conditioner will
beep 8 times and the display will show error code P1. The air
1
conditioning or dehumidifying action will stop but the fan may
continue to operate.
Ensure that the air conditioner is turned off and unplugged before
draining the water. Use caution when moving the air conditioner
to a location where the water can be drained so that it does not
overfl ow.
Pull out the drain plug and allow the water to completely drain.
Replace the drain plug, pressing fi rmly to ensure a tight fi t and no
leaks.
The P1 error symbol will disappear and the air conditioner will
resume regular function once power is restored.
2. Continuous Drain - Dry Mode
2
During dry mode, you may wish to set up the continuous drain
option so that the air conditioner will automatically drain collected
water.
Remove the exhaust hose during dry mode, it is not necessary.
Ensure that the air conditioner is turned off and unplugged before
setting up the drain hose.
Remove the upper drain plug and attach the drain hose that was
provided with the air conditioner. Ensure that there are no kinks or
bends in the drain hose as this can stop water from draining.
Place the open end of the drain hose over the receptacle that it
will drain into; this could be a basement fl oor drain, a sink or
similar.
The continuous drain is activated by gravity only. Ensure that the
drain hose goes straight down toward the fl oor from the drain
connection. If the hose is not positioned directly downwards,
water will not drain correctly.
19
Publicité
