Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
OPERATING MODES
Cool Mode
• Choose cool model to set the cooling function.
• Use the temperature control buttons to choose the desired temperature.
• Press the fan button to adjust the fan speed.
• The temperature can be set within a range of 17 - 30°C (62 - 86°F).
• The exhaust hose should be installed during cool mode to ensure the best results.
Dry Mode
• Choose dry mode to remove excess moisture from the air. Water will condense inside the appliance
and drain out the back.
• The humidity level and fan speed will be automatically set and cannot be modifi ed in dry mode.
• The exhaust hose does not need to be installed during dry mode.
• It may be necessary to install the continuous drain hose during dry mode to remove excess water.
Fan Mode
• Fan mode can be used to run the fan without engaging the cooling, heating or dehumidifying features.
• Press the fan button to choose the desired fan speed.
• The exhaust hose does not need to be installed during fan mode.
• In cooling or dry mode, press and hold the fan button for 3 seconds to set the fan to run continuously.
Press and hold the fan button for 3 seconds to disengage the continuous fan.
• During normal operation the fan will turn on and off with the compressor.
Auto Mode
Auto mode is a pre-set factory program that automatically defi nes the mode (cool or fan) and fan speed
based on the set temperature and the ambient temperature. The exhaust hose should be installed during
auto mode.
Heat Mode
• Choose heat mode to set the heating function.
• Use the temperature control buttons to choose the desired temperature.
• Press the fan button to adjust the fan speed.
• The exhaust hose should be installed during heat mode to ensure the best results.
• The temperature can be set within a range of 17 - 30°C (62 - 86°F).
14
Publicité
