Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
REMOTE CONTROL
1. Power button: Press to turn on or off.
2. Mode button: Press to select the mode.
3. Fan button: Press to select the fan speed.
4. Sleep button: Press to start the sleep feature.
5. Swing button: Press to start the auto swing
feature. When auto swing is activated, press
again to stop the louver at the desired angle.
6. Follow me button: Press to activate Follow Me.
7. LED button: Press to turn the LED display on or
off.
8. Timer off button: Press to set the automatic off
timer.
9. Timer on button: Press to set the automatic on
timer.
10. Shortcut button: Press to set and activate the
short cut function.
11. Temperature control buttons: Press to set the
temperature. Press and hold both temperature
control buttons for 3 seconds to change the
temperature display from °C to °F.
12. LED display: Shows the set temperature in °C or
°F or the auto-timer settings.
1
2
3
4 5
SHORTCUT
The shortcut feature can be used to save a preferred
setting. Shortcut is only available on the remote
control.
To set a shortcut, set the air conditioner to the
desired temperature and fan speed. Press and hold
the shortcut button for 2 seconds. Press the shortcut
button at any point in future to return to this setting.
If no shortcut is set, pressing the shortcut button will
cause the appliance to run in auto mode at 29°C
(79°F), with fan speed set to auto.
16
12
10
11
9
8
6 7
Publicité
