Hilti TE 3-ML Mode D'emploi page 11

3 Description
3.1 Parts of the tool and operating controls
3.2 Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, drywall / gypsum board, plastic, wood, metal and for driving and removing screws. The product
can also be used for light chiseling work on masonry and surface finishing on concrete.
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product described and its ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
▶ The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type plate.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
3.3 Examples of applications
The applications shown are possible.
3.4 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
For safe, reliable operation, use only genuine Hilti spare parts and accessories.
accessories and consumables approved by Hilti for use with this product can be found at your Hilti
Center or at www.hilti.group.
4 Technical data
4.1 Technical data
When powered by a generator or transformer, the generator or transformer's power output must be at
least twice the rated input power shown on the rating plate of the electric tool. The operating voltage
of the transformer or generator must always be within +5% and -15% of the rated voltage of the
electric tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations
from the rated voltage and for country-specific versions. Please refer to the electric tool's type
identification plate for details of its voltage, frequency, current and input power ratings.
Weight
Single impact energy
*2121691*
Printed: 07.01.2019 | Doc-Nr: PUB / 5279057 / 000 / 05
1
@
;
=
%
&
(
)
+
§
/
:
∙
2
TE 3-ML
3.1 kg
2.1 J
2121691
Three-jaw chuck (TE 3-ML)
SDS quick-release chuck
Chuck locking ring
Connection for the dust collection module
Depth gauge
Forward / reverse switch
Control switch lock
Control switch
Supply cord
Function selector switch
Depth gauge release button
Side handle
TE 3-CL
3.0 kg
2.1 J
Spare parts,
English 5