Cembre TC050 Notice D'utilisation Et Entretien page 3

1. GENERAL CHARACTERISTICS
– Application range: suitable for cutting copper and aluminium cables having a max ø
– Max operating pressure: .............................................................................................. 700 bar
– Oil necessary (displacement): ..................................................................................... 38 cm
– Dimensions: length ......................................................................................................... 325 mm (12.8 in.)
width .......................................................................................................... 112 mm (4.4 in.)
– Weight: ................................................................................................................................. 3,2 kg
2. INSTRUCTIONS FOR USE
2.1) Setting
(Ref. to Fig. 3)
The head is equipped with a "self-lock"quick male coupler suitable for connection to a hydraulic,
pneumatic or electric pump from the CEMBRE range.
Insert the conductor between the blades, up to the desired cutting point. For a running conductor,
release the latch (16) and open the tool head.
Fully retract the lower blade (07) before attempting to open the tool head.
With the conductor on the lower blade (07), close the tool head and fully secure the latch (16).
Before commencing the cutting operation ensure that the latch (16) is fully secured: partial
closure may damage the tool head.
2.2) Blade advancement
Operate the pump to advance the lower blade.
Make sure the blades are exactly positioned on the desired cutting point; otherwise re-open the
blades, as § 2.4 and re-position the cutting head.
2.3) Cutting
Continue operating the pump to close the blades and progressively cut the cable.
This head has been specifi cally designed for cutting copper or aluminium cable, do not attempt
to cut steel ropes or steel reinforced cables.
2.4) Blade opening
To open the blades, fully discharge the oil pressure from the pump.
3
HYDRAULIC CUTTING HEAD
of ................................................................................................... 50 mm
TC050
ENGLISH
(2 inches)
(10,000 psi)
3
(2.3 cu. in.)
(7 lbs)