Publicité
Les langues disponibles
Les langues disponibles
PRESETTING STATIONS IN THE TUNER MEMORY
Up to 40 stations (20 MW / 20 FM) can be stored in the tuner memory for easy recall at any
time. Use either the Automatic or Manual tuning methods described on page 42 to tune
to the first station to be stored in memory. (Example "FM 103.5 MHz")
1.)
When the desired station frequency appears in the display, press
and release the TIME SET / MEMORY button on the remote
control or touch TIME SET / MEMORY on the top panel. The P –
01(Preset Memory #1) indicator will begin flashing in place of the
radio frequency display.
To enter your station in Preset Memory #1, press the TIME SET
/ MEMORY button on the remote control or touch TIME SET /
MEMORY control on the top panel again. The P – 01 will stop
flashing and remain on the display for 5 seconds, and then the
display will return to the selected radio frequency. Your selected
station has now been entered in Preset Memory #1.
Note: You must press the TIME SET / MEMORY button while the memory indicator is flashing
in order to enter the station in memory. If the memory indicator stops flashing the station will
not be entered in the memory.
2.)
Tune to the next station that you want to memorize and when
that station appears in the display press the TIME SET /
MEMORY once. The P – 01 indicator begins flashing. Press the
PRESET / MENU + or - button on the remote control or touch
PRESET / ALM1 - or PRESET / ALM2 + control on the top panel
to select a different preset memory number, and then press the
TIME SET / MEMORY button once more to enter your station in
the selected preset memory number.
3.)
Repeat Step 2, choosing a different preset memory number
each time until you have entered up to 20 stations on one band.
You may then select the MW band and follow the same
procedure to preset up to 20 MW stations in the tuner memory.
44
Publicité
