Everdure KILN Serie Mode D'emploi page 8

OPERATING INSTRUCTIONS:
Once your regulator is connected, open the gas from your gas cylinder.
First-time use
It is highly recommended prior to cooking on your appliance for the first time that you conduct a burn-off. Turn the
main burner on high for 30 minutes. Then turn off the main burner and let the oven cool down naturally. Once the
appliance has cooled, use a paper towel to wipe the inside of the appliance to remove any soot from the burn-off.
Be careful the oven may still be hot in some places.
KILN S Series - 1 Burner
To ignite the burner, push the knob in and slowly turn it anti-clockwise until you hear a click of the ignition. This
should take at least 8-10 seconds as you allow the gas to flow into the burner inside the appliance. Hold in for another
10 seconds after ignition, then release. Set the burner to your desired requirement. If the burner does not light, leave
the knob at OFF and wait 5 minutes before trying again.
KILN R Series - 2 Burner
To ignite the burners, push the knob in and slowly turn it anti-clockwise until you hear a click of the ignition. This
should take at least 8-10 seconds as you allow the gas to flow into the burner inside the appliance. Hold in for another
10 seconds after ignition, then release. Set the burner to your desired requirement. Press the button for the turntable
to begin rotating inside the appliance. If the burner does not light, leave the knob at OFF and wait 5 minutes before
retrying. WARNING: Do not leave the boost burner activated for an extended period of time without the turntable
running, as this may cause damage to the stone.
8
Symbol Description
Main
burner
Boost
burner
Turntable
rotation