Publicité
Les langues disponibles
Les langues disponibles
CHECKING THE BURNERS FOR FLAME STABILITY:
Visually check the burner flames for correct function when the unit's operating by inspecting the burner flame/flames
with the stone (EKILN R Series - 2 burner only) removed. A good flame should be blue with some yellow tipping.
Note: take care when viewing the burner operation not to lean into the flame; failure to do this may result in personal
injury.
MANUAL IGNITION:
In the instance where the automatic ignition fails, the product can be lit with the provided matchstick holder.
MAIN BURNER:
Using the matchstick holder, carefully ignite the main burner as shown below.
BOOST BURNER:
Using the matchstick holder, carefully ignite the lower burner through the lower burner viewing port.
This is only applicable to boost burner models.
12
Publicité
