Publicité
Les langues disponibles
Les langues disponibles
9051475
2.
Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store unused tools properly in a dry, safe and secure location to prevent
rust, damage or misuse.
4.
Do not install or use in the presence of flammable gases, dust or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the
Canadian Standards Association (CSA) or American National Standards
Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2.
Wear protective clothing designed for the work environment and tool.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
SPECIFIC SAFETY
WARNING! DO NOT let comfort or familiarity with product (gained from
repeated use) replace strict adherence to the tool safety rules. If you use
this tool unsafely or incorrectly, you can suffer serious personal injury.
BATTERY SAFETY
WARNING! Only charge a battery with a charger designed for that
purpose. Do not use modified chargers or a charger that does not
specify the voltage, amperage or recharge rate. Improper charging can
lead to battery rupturing.
WARNING! Do not charge a damaged or frozen battery. Contact your
local municipality for proper disposal procedures.
Consult the Safety Data Sheet (SDS) for your battery before use or
maintenance.
www.princessauto.com / 1-800-665-8685
20V 4A LI-ION FAST BATTERY CHARGER
V1.1
Page 4
Publicité
