Hella Gutmann SEG V Mode D'emploi page 105

Hella Gutmann
7.6.6. Sending Diagnostic Data
Use this function to send diagnostic data to an e-mail address in case of troubles.
Proceed as follows to send diagnostic data to the saved e-mail address:
1. Open the list under Save diagnostic data with
2. Select E-mail and send the diagnostic data with
7.6.7. Report
Proceed as follows to display the report in another language:
1. Select the main menu Settings > Report.
2. Open the list under Language with
3. Select the requested language.
ð The prevailing selection will be saved automatically.
Proceed as follows to display a logo on the report:
1. Select Settings >Report in the main menu.
2. Open the list under Logo with
If >With logo< is selected, a logo will appear on the report.
If >No logo< is selected, no logo appears on the report.
ð The prevailing selection will be saved automatically.
7.6.7.1. Having Indicated Light Distribution Images
Proceed as follows to display light distribution images on the report:
1. Open the list under Images with .
If >With images< is selected, the light distribution will appear on the report.
If >No image< is selected, no light distribution appears on the report.
ð The prevailing selection will be saved automatically.
7.6.8. Level compensation
Activate the level compensation and make settings here.
A level sensor registers the inclination angle of the SEG V and compensates floor unevenness and inclinations of up to 2%
to prevent improper measurements.
7.6.8.1. Executing Manual Level Compensation
Proceed as follows to perform the manual level compensation:
1. Select Settings > Device > Extended in the main menu.
SEG V
.
. Observe the information window.
.
.
Device configuration | 7.
105