Set Temperature - Maytag MEDX655DW Guide D'utilisation Et D'entretien

Masquer les pouces Voir aussi pour MEDX655DW:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.

Set temperature

Select temperature by turning the knob to the desired position
or select the Sensor Dry cycle that has the temperature
included in the cycle selections. Turn the TEMPERATURE knob
to change the drying temperature setting. See "Setting the
Drying Temperature".
NOTE: Not all options and settings are available with all cycles.
5.
Select Signal (if desired)
Turn the SIGNAL knob to select the desired setting (Off, Low,
or High). The Signal produces an audible sound when the
drying cycle is finished. Promptly removing clothes at the end
of the cycle reduces wrinkling.
8
6.
Select Wrinkle Control (if desired)
Select Wrinkle Control by turning the knob to the desired
position.
Get up to 120 minutes of heat-free, periodic tumbling at the
end of a cycle. Turn the WRINKLE CONTROL knob to OFF,
60 min., or 120 min. at any time before the cycle has ended.
NOTE: Not all options and settings are available with all
cycles.
7.
Press PUSH TO START to begin
cycle
Push and hold the PUSH TO START knob to begin the cycle.
DRYING RACK
To purchase a drying rack for your dryer, please refer to
"Assistance or Service" on the back cover of the manual or
contact the dealer from whom you purchased your dryer.
Part Number
3406839
Drying rack - fits 29" Super Capacity Plus
Accessory

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Mgdx655dwMedx6stbwMedx500bw3406839Medc300xwMedc200xw

Table des Matières