Maytag MEDX655DW Guide De Démarrage Rapide

OPERATING INSTRUCTIONS
WARNING
Fire Hazard
No washer can completely remove oil.
Do not dry anything that has ever had any type of oil
on it (including cooking oils).
Items containing foam, rubber, or plastic must be
dried on a clothesline or by using an Air Cycle.
Failure to follow these instructions can result in
death or fire.
WARNING
Explosion Hazard
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS, located in your
appliance's Owner's Manual, before operating this appliance.
Button Descriptions
1. TEMPERATURE
Select a drying temperature based on the fabrics in your load. If you are
unsure of the temperature to select for a load, select the lower setting
rather than the higher setting.
2. SIGNAL
The Signal produces an audible sound when the drying cycle is finished.
Turn the Signal knob to select the desired setting (Off, Low, or High).
Promptly removing clothes at the end of the cycle reduces wrinkling.
3. CYCLE CONTROL KNOB
Use the Cycle Control knob to select available cycles on your dryer. Turn
the knob to select a cycle for your laundry load. See the online "Cycle
Guide" for details.
Timed Dry
Will run the dryer for the specified time on the control. On models with a
selectable temperature knob, you may choose a setting based on the
fabrics in your load. Drying time and temperature will depend on your
dryer model.
Sensor Dry
Senses moisture in the load or air temperature and shuts off when the
load reaches the selected dryness level. Gives the best drying in the
shortest time. Drying time will vary based on fabric type, load size,
dryness setting, and temperature setting.
4. WRINKLE CONTROL
The Wrinkle Control feature will run after your drying cycle is complete. It periodically starts and stops the dryer,
tumbling the load without heat to help avoid wrinkling.
Wrinkle Control automatically starts at the end of the cycle. Opening the door will stop this feature.
Turn the Wrinkle Control knob to Off, 60 minutes, or 120 minutes at any time before the cycle has ended.
W11355747A
W11356963A-SP
Dryer Quick Start Guide
Step 1. Clean Lint Screen
Step 2. Load Clothes; then Close
Door
Step 3. Select Cycle and Settings
Step 4. Press Start
Not all features, cycles, and options are available on all models. Appearance may vary.
NOTE: A signal will sound periodically when the Wrinkle Control setting is selected, but only if the Cycle Signal is also
selected.
5. PUSH TO START
Press the Push To Start knob to start the dryer.
Cycle Guide – Normal Cycle
SENSOR DRY- Senses moisture in the load or air temperature and shuts off when the load reaches the selected
dryness level.
Not all cycles and settings are available on all models.
Items to Dry: Cycle: Temperature:
Jeans, heavy work Normal High
clothes, towels
More Dry
Work clothes, Medium or Low
Energy Preferred
medium-weight
Less Dry
fabrics, sheets
Casual, shirts, Low
pants, lightweight
items, synthetics,
delicates,
athleticwear
NOTE: Government energy certifications for the Gas and Electric models were based on the Timed Dry cycle with
the Maximum drying temperature setting. The as-shipped defaults of Auto Dry, AccuDry
Normal cycle, Low heat, Wrinkle Shield ™ Option were not used.
NOTE: If loads do not seem as dry as you would like, select More Dry the next time you dry a similar load. If loads
seem drier than you like, select Less Dry the next time you dry a similar load.
Online Ordering Information
For detailed installation instruction and maintenance information, winter storage, and transportation tips, please
see the Owner's Manual included with your machine.
For information on any of the following items, the full cycle guide, detailed product dimensions, or for complete
instructions for use and installation, please visit https://www.maytag.com/owners, or in Canada
https://www.maytag.ca/owners. This may save you the cost of a service call.
However, if you need to contact us, use the information listed below for the appropriate region.
United States:
1–800–344–1274
Maytag Brand Appliances
Customer eXperience Center
553 Benson Road
Benton Harbor, MI 49022–2692
Description:
Automatic cycles give the best drying in the
shortest time. Drying time varies based on
fabric type, load size, and dryness setting.
Select a drying temperature based on the
fabrics in your load. If you are unsure of the
temperature to select for a load, select the
lower setting rather than the higher setting.
™
Cycle,or Automatic Dry,
Canada:
1–800–688–2002
Maytag Brand Appliances
Customer eXperience Centre
200–6750 Century Ave.
Mississauga, Ontario L5N 0B7