IN
=r
nzm
Installation Guide (continued)
O Installation Procedures
Mounting Tab
m
.
-"
'
-
=
-
-
© Mounting
Collar
«
.-
-r7
-
Lock Lever
Make sure that the lock
lever is flush with the
mounting collar (not
projecting outward).
Dashboard
Screwdriver
2. Secure the rear of the unit.
a) Check the electrical connection by referring to this operating instructions.
b) Connect the Mounting Bolt ©, using a suitable wrench.
c) Insert the unit into Mounting Collar (D and push it in until "click" is heard.
© Mounting Bolt
Unit
d) Secure the rear of the unit to the car by either of the two recommended methods.
@ Using the Rubber Cushion (Optional)
(If there is an existing Rear Support Bracket on the Fire Wall of Car.)
Rubber Cushion (Optional)
(6) Mounting Bolt
@ Mounting Collar
CQ-DFX77/DFX55/DF66/DF44EUC