Clock
Basics
(The clock na
is 12-hours.)
Press and Hold é
Initial Time Setting
The DISP[D] button is inoperative while Scan plays in CD or CD
Changer. Cancel Scan plays before using the DISP[D] button.
(1) Press DISP[D]. "ADJ" is displayed.
@Press
and hold DISP[D] again for
more than 2 seconds. "12" blinks indi-
cating the time setting mode is acti- .
vated.
@To
set hours,
press
[> TUNE]
or
[< TUNE].
(4) Press DISP[D] again for minute set-
ting.
(6) To set minutes, press [> TUNE] or
[< TUNE].
Hold
[> TUNE]
or [< TUNE]
to
change numbers rapidly.
(6 When you have set the time, press
DISP[D).
Resetting the Time
When you want to reset the time, press and hold DISP[D] for
more than 2 seconds to activate the time setting mode. Then, re-
peat steps @ to © above.
Selecting the Clock Display
Press DISP[D] for clock display.
Press DISP[D] once again, and the clock display disappears.
In Tuner Mode
Presets
«>
Clock
In CD Mode
No Display (Clock Off)
<—>
Clock
When power is turned off while the time is displayed, the
clock mode remains on. When the [PWR] is pressed again,
the system is completely off.
Note: Before you leave your car that has no ACC, be sure
to switch power off.
CO-DEX77/DFEX55/DF6S/DF44EUC
In
es =a