Safety and environment instructions
1.1.1 HC warning
If the product comprises a cooling system using R600a
gas, take care to avoid damaging the cooling system and
its pipe while using and moving the product. This gas
is flammable. If the cooling system is damaged, keep
the product away from sources of fire and ventilate the
room immediately.
The label on the inner left side indicates the
C
type of gas used in the product.
1.1.2 For models with water dispenser
Pressure for cold water inlet shall be maximum 90
•
psi (6.2 bar). If your water pressure exceeds 80 psi
(5.5 bar), use a pressure limiting valve in your mains
system. If you do not know how to check your water
pressure, ask for the help of a professional plumber.
If there is risk of water hammer effect in your
•
installation, always use a water hammer prevention
equipment in your installation. Consult Professional
plumbers if you are not sure that there is no water
hammer effect in your installation.
Do not install on the hot water inlet. Take
•
precautions against of the risk of freezing of the
hoses. Water temperature operating interval shall be
33°F (0.6°C) minimum and 100°F (38°C) maximum.
Use drinking water only.
•
Refrigerator/User Manual
7 / 23 EN