Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
A S S E M B LY I N S T R U C T I O N S
WARNING: Beware of the power cords of
lighting set, make sure it will not be pinched
or damaged during assembly. Fig. 10b
Step 8: Tighten all screws.
FIREPLACE INSERT
INSTALLATION:
The fireplace insert can be installed after
the mantel has been fully assembled.
WARNING: Make sure the fireplace insert
controls are in the OFF position and the unit
is NOT plugged in.
Step 1: Place the INSERT in
mantel on the floor. Carefully lift the INSERT
into the mantel until the top stopper is
against to MANTEL. See Fig. 11
Step 2: Attach 2 L-BRACKETS [J] on the top
of insert and lock in place with 4 MOUNT-
ING SCREWS [O] but do not tighten the
screws. Adjust the L-BRACKETS [J] to
against the UPPER FRONT [C] and lock in
place with 2 SHORT KD SCREWS [K]. See
Fig. 12 See Fig. 12
Fig. 10b
Step 3: Attach 4 MEDIUM BRACKETS [L]
to the bottom of insert with 4 MEDIUM KD
SCREWS [M] as shown in Fig. 13
front
of the
Step 4: Tighten all SCREWS.
Fig. 11
Step 5: Place the Fireplace Mantel to
desired location.
9
Fig. 12
Fig. 13
Publicité
