Bosch HSG738257M Mode D'emploi page 16

Operating the appliance
en
Rotary spit
Preparing the rotary spit
Slide a retaining clip onto the rotary spit and screw
1.
on the handle.
Place the roast as close as possible to the centre of
2.
the rotary spit.
Use retaining clips to secure the roast in place.
3.
Use milled screws to secure the retaining clips.
4.
Inserting the rotary spit
:
Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
Insert the rotary spit frame into the threaded bushes
1.
16
Place the rotary spit onto the rotary spit frame and
2.
unscrew the handle.
Slide the universal pan into shelf position 1 and slide
3.
the rotary spit into the motor mount.
Close the appliance door.
4.
Switching on the rotary spit
When using the rotary spit, preheat the oven
Note:
using the ( type of heating. Only set the G type of
heating once the rotary spit has been inserted.
Turn the control knob for the oven to the G position.
1.
Set the temperature.
2.
Add some water to the universal pan in order to
Note:
catch any fat that drips out.
Removing the rotary spit
:
Warning – Risk of burns!
Never touch the hot surfaces of the cooking
compartment or the heating elements. Children must be
kept at a safe distance from the appliance at all times.
Open the appliance door carefully. Hot steam may
escape.
Opening the appliance door
1.
Slowly pull the universal pan until it is halfway out of
2.
the cooking compartment.
Completely remove the universal pan from the
3.
cooking compartment and set it on the worktop.
Screw on the handle and remove the grill spit from
4.
the grill spit frame.