Floor type
Ceiling type
4) Install the unit where the drain pipe can be easily installed.
5) The space from the unit to the ceiling should be kept as much as possible so
as for more convenient service.
3.2 Unit Installation
3.2.1 Indoor Unit Installation
3.2.1.1 Preparation for Installing the Indoor Unit
(1) Dismantle the clasp in the left and right grille and take down the screws.
(2) Take down the fixed screws in the left and right side plate.
(3) Turn on the left and right side plate in arrow direction.
DC Inverter U-match Series Floor Ceiling Type Unit
17
Unit: mm