Publicité
Les langues disponibles
Les langues disponibles
Maintenance and care
5
Maintenance and care
5.1
Suction plate
•
Clean the suction plate from adhering objects, dirt and dust at least once a day. Clean sponge
rubber with compressed air and/or water jet. → For this remove the rubber foam seal.
Replace damaged suction plate (cracks, holes, ripples) immediately.
•
•
Use cold cleaner to clean the device (do not use petroleum ether or corrosive liquids).
5.2
Leak test
•
Check the unit for leaks before each use.
5.3
Annual audit
Check all components, especially the seal. Inspection for cracks, wear, corrosion and functional
•
reliability by an expert.
5.4
Hints to the type plate
Type, serial-number and production year are very important for the identification of your
•
device. If you need information to spare-parts, warranty or other specific details please refer to
this information´s.
The maximum carrying capacity/working load limit (WLL) is the maximum load which can be
•
handled with the device. Do not exceed this carrying capacity/working load limit (WLL).
Example:
5.5
Hints to the renting/leasing of PROBST devices
With every renting/leasing of PROBST devices the original operating instructions must be
•
included unconditionally (in deviation of the user´s country's language, the respective
translations of the original operating instructions must be delivered additionally)!
6
Disposal / recycling of devices and machines
The product may only be taken out of service and prepared for disposal / recycling by qualified
personnel. Correspondingly existing single components (such as metals, plastics, liquids,
batteries/rechargeable batteries etc.) must be disposed of/recycled in accordance with the
nationally/country-specific applicable laws and disposal regulations!
The product must not be disposed of in household waste!
58500014
14 / 17
GB
Publicité
