Operation
4.2.4 Replace battery
•
To remove the battery from the device, slide
the battery clip forward (away from the
handle).
•
The battery can now be removed from the
top of the battery compartment.
To reinsert a battery into the device, insert
•
the battery into the battery compartment and
slide the battery clip backward (toward the
handle) to secure the battery.
4.2.5 Charging the battery
•
The battery is supplied with the device in a partially charged state and must be fully charged
before first use.
The charging time is approx. 2 hours. When the battery is fully charged, the operating time of the
•
vacuum pump is approx. 2 hours.
The batteries can be charged at any time without reducing their service life. Interrupting the
•
charging process will not damage the batteries.
Only the supplied battery charger may be used!
•
Make sure that the mains voltage
corresponds to the data on the charger's type
plate.
•
The charger may only be used in a dry
environment.
The charger is not waterproof!
Keep the battery away from flammable
•
objects during charging!
•
To change the interchangeable plugs,
observe the respective direction of rotation
on the mains plug (OPEN / LOCK).
•
Connect the mains plug of the charger to a
socket.
Connect the charger to the battery.
•
•
The battery is charged as soon as it is
connected to the charger.
The charging process is automatically
•
terminated when the battery is fully charged.
58500014
12 / 17
GB