probst FXAH-120-GRABO-PRO-LIFTER-GREENLINE Instructions D'emploi page 31

Operation
4.2 Device operation
4.2.1 Connecting a lifting strap to the device
The four metal eyelets around the handle are
•
used to attach the lifting strap.
Secure one of the buckles (at each end of
•
the strap) in an eyelet provided for this
purpose.
Carrying strap can be placed around the
•
operator's shoulder for load support.
4.2.2 Replacing the rubber foam seal
Remove the damaged or used rubber foam
•
seal by pulling it out.
Carefully press the new rubber foam seal into
•
position.
4.2.3 Change filter
• Use the tip of a screwdriver to remove the
plastic plug (ring) and filter on the bottom of
the device.
Insert a new filter (or cleaned filter) and push
•
the plastic plug (ring) back in to secure the
filter.
58500014 11 / 17 GB