Costway NP10844 Instructions De Montage page 6

Setting Up the Canopy
4
ADJUSTING THE CANOPY HEIGHT
Lift up one side. Grasp the outer or upper leg with one hand and
□
pull out the inner leg with the other.
Extend until the button engages.
□
Set legs to desired height.
□
5
OPERATING THE AWNING PANELS
Pull up one side of the awning panel arms until the support arm
□
locks into hole on leg.
Rotate the stabilizer bar and slid over the rivet on the upper
□
perimeter truss as shown.
10
x4
Rivet
x4
Setting Up the Canopy
6
CONFIGURING DESIRED SETUP FOR AWNINGS
Secure the strap around leg with toggle.
□
7
SECURING THE CANOPY IN PLACE
Fill the weight bag(d) with sand or gravel.
□
Connect the hook and loops of the weight bag around each leg.
The included weight bags are designed for quick and easy use.
Insert a stake into the foot of each canopy leg.
□
Measure out each leg to a proper distance and secure four
□
stakes(e) to the ground. Tie the pre-attached ropes to the stakes
in the ground. Ensure the ropes have the proper tension by
adjusting the plastic adjusters on the ropes.
11