Télécharger Imprimer la page

BWT myPOOL MP-IHP 50 Mode D'emploi page 39

Publicité

Les langues disponibles

Les langues disponibles

C.
Please don't put hands into outlet of the swimming pool heater, and
don't remove the screen of the fan at any time;
D.
If there are abnormal conditions such as noise, smell, smoke and
electrical leakage, please switch off the machine immediately and contact
the local dealer. Don't try to repair it yourself;
E.
Don't use or stock combustible gas or liquid such as thinners, paint and
fuel to avoid fire;
F.
In order to optimize the heating effect, please install heat preservation
insulation on pipes between swimming pool and the heater. During
running period of the swimming pool heater, please use a recommended
cover on the swimming pool;
G.
Connecting pipes of the swimming pool and the heater should be ≤10m,
or the heating effect of the heater cannot be ensured;
H.
This series of machines can achieve high efficiency under air temperature
of +15℃~+25℃.
2.
Safety
A.
Please keep the main power supply switch far away from the children;
B.
When a power cut happens during running, and later the power is
restored, the heater will start up automatically. So please switch off the
power supply when there is a power cut, and reset temp when power is
restored;
C.
Please switch off the main power supply in lightning and storm weather
to prevent from machine damage that caused by lightning;
D.
If the machine is stopped for a long time, please cut off the power supply
and drain water clear of the machine by opening the tap of inlet pipe.

Publicité

loading