CONTROLS
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
B
Controls
A. CONTROL PANEL DISPLAY
Displays the Set Temperature in degrees Fahrenheit or
degrees Celsius, or the hours remaining in a Time Delay. The
corresponding indicator light will illuminate.
B. Power Button
Turns ON/OFF power to the air conditioner.
NOTE: Turning off power by pressing the POWER button does
NOT disconnect the appliance from the power supply.
• Press the POWER button. The Power indicator will illuminate.
C. Mode Button
Press the MODE button to toggle among the operating options.
The corresponding indicator will illuminate:
Cool – Cools the room to the set temperature
Dry – Reduces the humidity in the room
Fan – Circulates the air in the room without cooling.
D. Remote Control Signal Receiving Window
Aim the Remote Control at this window so the Control will receive
the signal.
E. + and – Buttons
Adjusts the Temperature or Hours in Time Delay.
To Set the Temperature:
The temperature can be set between 61ºF and 89ºF (17ºC and
30º C) when the air conditioner is in Cool mode.
1. Press the MODE button until the Cool mode is selected.2
2. Press the + or – buttons to select the Temperature.
NOTE: The temperature cannot be set when the air
conditioner is in either Fan or Dry mode.
49-5000468 Rev. 1
Cool
Fan
Dry
B
C
D
C
D
A
Low
Med
Temp / Time
F
E
A
E
F. Fan Speed Button
The fan speed can be adjusted from Low speed, Medium speed, to
High speed when the air conditioner is either in Cool or Fan mode.
NOTE: The fan speed cannot be adjusted when the unit is in Dry
mode.
• Press the Fan Speed button to toggle among the three speeds.
The corresponding fan speed indicator will illuminate.
G. Timer Button
Program a time from (1-hour to 24-hours) for the air conditioner
to turn Off or On. When a Time Delay is programmed, the Timer
indicator light will illuminate.
While the air conditioner is operating:
1. Press the TIMER button.
2. Press the + or – buttons to select the number of hours you want
the air conditioner to continue to operate before turning Off.
NOTE: Wait approximately 5 seconds for the Turn-Off time to be
saved.
While the air conditioner is off:
1. Press the TIMER button.
2. Press the + or – buttons to select the number of hours you want
the air conditioner to remain off before turning On.
NOTE: Wait approximately 5 seconds for the Turn-On time to be
saved.
To cancel the timer:
• Press the Timer button once, the hours remaining will flash, press
the timer button again and the timer will be canceled.
H. WiFi Connect Pad (on some Models)
1. Connect your air conditioner to WiFi router.
2. Press and hold the TIMER button for 3 seconds to connect the
app or disconnect the app.
Refer to the "WiFi Set up" section for more information.
High
G
H
(on some models)
F
G
H
5