Flex FX1331 Manuel De L'utilisateur page 13

LED indicator
Working
displayed on
Mode
panel
1
2
ON ; OFF
NOTICE: The variety of wood density and metal
material may affect the final outcome. The user
should select appropriate mode based on the
application.
WARNING
running. Sudden change of torque may cause
the loss of control causing possible injury or
damage to the tool or workpiece.
Purpose
Tightening when final
appearance is important
When tightening, the torque
is moderate
Driving self-tapping screws
into sheet metal when final
appearance is important
Do not change the working
mode while the tool is
Example of application
Tightening screws into sensitive
boards, such as plaster boards
Driving screws into hard materials
as well as tightening bolts
Recommended screw type: # 8 x
1/2"
NOTE: The LED indicator(s) will turn off
approximately 1 min after the trigger switch is
released.
NOTE: When the tool is turned on after a break,
the working mode will revert to the last used
setting.
-13-