Tripp-Lite DWF1327M Manuel Du Propriétaire page 4

1a. Mount on Wood Stud Wall
• Make sure that mounting screws are anchored into the center of the studs.
Use of a stud finder is highly recommended.
• Installers are responsible to provide hardware for other types of mounting situations.
• Installers must verify that the supporting surface will safely support the combined
load of the equipment and all attached hardware and components.
14-03-246-933325.indb 4
Anchor
Bolt
WARNING
4
1
2
Find and mark the
exact location of
mounting holes
3
Drill pilot holes
Screw the wall
mount onto
the wall
4/16/2014 11:37:07 AM