Télécharger Imprimer la page

Kenwood M-9000S Manuel D'instructions page 60

Publicité

Les langues disponibles
  • FR

Les langues disponibles

26. Troubleshooting
Please check the following points in case of malfunctions:
No sound
 Plug in the power adapter properly.
 Adjust the volume to the correct level.
 Make sure the desired source is selected.
The system does not respond at the touch of a button
 Unplug the AC adapter and reconnect it.
Problems with radio reception
 Reorient the antenna.
 Find a more suitable location.
 Other electrical appliances interfere with the reception.
 Location not suitable for receiving DAB + signals.
A network connection cannot be established
 Check the WLAN function, make sure the password is correct.
 Try to set an IP address on the device.
 Activate the DHCP function on the router and re-establish the connection on the device.
 A firewall is activated in the network - set it so that access is possible.
 Place the radio closer to the router or AP.
 Restart the router or AP.
27. Maintenance and care
Cleaning the housing
Use a cloth lightly moistened with a mild detergent. Do not use detergents containing alcohol, am-
monia or scouring agents.
Cautions on condensation
Condensation (dew) may form inside the unit if there is a significant difference between the tempera-
ture of the unit and the ambient temperature. If condensation occurs inside the unit, proper function
is no longer guaranteed. In this case, you have to wait a few hours; After the moisture has dried, the
device can be reused.
Special care should be taken in the following circumstances
When the unit is moved from one place to another at a much higher or lower temperature, or when
the humidity at the installation site increases, etc.
Handling of CDs
Hold the CD so that you do not touch the signal surface. (The unprinted side is the playing side.)
Use only use CDs with
marking. In some cases, CDs with this marking may not play back prop-
erly.
28

Publicité

loading