Impecca DVP-775 Mode D'emploi page 9

1. Press repeatedly to display disc information.
2. Turn the sound on/off temporarily
3. Input chapter numbers or select a track number
4. Enable subtitles (disc must support this function)
5. Change between PAL and NTSC video outputs
6. Highlight menu items using the directional arrows
7. Make a menu selection
8. Enter the DVD player setup menu
9. Skip to the previous chapter or track
10. Skip to a specific time in the film or song
11. Press repeatedly to rewind playback in 2x, 4x, 8x, 16x and
32x increments. Press again to resume normal playback.
12. Begin or pause playback
13. Switch between DVD and AV input
14. Stop playback
15. Switch the unit on/off
16. Switch between the DVD/USB/SD Card sources
17. Increase and decrease volume
18. Zoom in on the scene at ratios of 2x, 3x, and 4x. Use the
directional arrows to pan across the screen.
19. Change audio language tracks (if supported by your disc)
20. Change camera angles (if supported by your disc)
21. Return to the menu when your disc has PBC functionality
22. Place a track on the program list
23. Skip to the next chapter or track
24. Scan the video track slower than normal playback speeds
25. Press repeatedly to fast forward playback in 2x, 4x, 8x,
16x and 32x increments. Press again to resume normal
playback.
26. Repeat tracks or video playback.
Battery insertion: Open the remote control door and insert two standard AAA batteries. Do not
install the battery backwards and do not mix used and fresh batteries. Do not place the remote
control near a heat source.
7