GE 24 Mode D'emploi page 10

How to Rearrange Your Shelves
Shelves in the fresh food compartment are adjustable, enabling
you to make efficient shelf arrangements to fit your family's food
storage needs.
To remove shelves:
Tilt the shelf up at front,
then lift it up and out of the
tracks on the rear wall of
the refrigerator.
Bins on Fresh Food Compartment Door
Adjustable bins can easily be carried from refrigerator to work area.
To remove:
Lift bin straight up until
mounting hooks disengage.
To replace or relocate:
Select desired shelf height,
engage bin's hook in slots
on the tracks of the door,
and push in. Bin will lock
in place.
Removable Shelves in Freezer Compartment
Shelves in the freezer compartment are easily removed and replaced.
To remove:
1. While pressing the tabs on the shelf
supports on the right wall, lift the shelf
out of the grooves in the supports.
2. Pull the shelf sideways until the rods
come out of the holes on the left wall.
10
SHELVES
1
Lift up
2
and out
Tilt up
(on some models)
Divider
To relocate shelves:
Select desired shelf height.
With shelf front raised
slightly, engage the top
hooks in the tracks at the
rear of the cabinet. Then
lower the front of the shelf
until it locks into position.
Wire shelves (on some
models) are adjustable in the same manner.
The divider (on some models) helps prevent tipping, spilling or
sliding of small items stored on the door shelf. Place index finger and
middle finger on either side of the divider near the front and simply
move it back and forth to fit your needs.
To replace shelves:
Insert the rods into the holes. Then, while
pressing the tabs, lower the shelf into the
grooves in the supports. Be sure the shelf
wire is fully inserted into the grooves.
1
Engage
top hook
2
Lower to
lock into place