CONFIGURATION
Time Display
Manage
my mediaU
Network
Date & Time
Analog/Digital
When it is enabled, my mediaU will show on the main menu. If various
mediaU accounts exist in the Radio, select the default login account in here.
Wireless Network Configuration: Enable/disable WiFi network.When you
enable the WiFi network, the system will automatically select the required
AP.Enter WEP or WPA code to connect the WiFi.
Wireless Network (APP):Scan QR code or visit:
www.mediayou.net/airlink.php
Wireless Network (WPS PBC): If you are using a router with WPS/QSS
button, you can set up the network connection easily via WPS function.Enter
it and go to press the WPS/QSS button on your router within 120
seconds.The connection between the router and device will then be
configured automatically.
Manual Configuration: You can choose DHCP (which assignes the ip address
automatically) or manually input the IP address for wireless network
connection.The following information has to be entered: SSID (nameof
access point),IP Address,subnetmask,default gateway,preferred DNS
server,alternate DNS server.
Check Network When Power On: Enable/disable WiFinetwork.When you
enable the WiFi network, the system will automatically search for available
AP.Select the required AP.
Setup PIN for APP: Enable/Disable
Set Date and Time
Set Time Format: 12 Hour or 24 Hour
Set Date Format: YYYY/MM/DD, DD/MM/YYYY, MM/DD/YYYY
Daylight Saving Time (DST): On or Off
⚫
ON
Tips: When "ON" is selected, the time will be one hour earlier than the
current time.
⚫
OFF
Tips: When "OFF" is selected, the time will be same as the current time. If it
was already in "Daylight Saving Time(DST)" and you choose"OFF",the time
will be deducted by one hour,the time will be same as the actual time.
15