LENCO DIR-270 Mode D'emploi page 10

Enter your password by pressing the numeric keys(20) on the remote control, followed by the
Navigation right(12) button (NOTE: you have to press the navigation right(12) after every
character).
To make a correction, press the Navigation left (4) to go backwards and delete the last character
at the same time. When the password is completed, press the OK(3) button to confirm.
If you want to enter the password directly on the DIR-270 front panel, you can turn the
Navigation(8) wheel to select the first character and then press the
forward to the next character. To make a correction, press the
delete the last character at the same time.
When the password is completed, press the Navigation (8) button to confirm.
Note: following characters can be used:
Numbers(from 0-9)
English letters(from A to Z and from a to z)
Characters(DEL,@,Blank,!,",#,$,%,&,*,',+ and (,)
2. WPS PBC network configuration
You can easily connect by pressing the WPS button on your router and then selecting YES(WPS) on
your DIR-270 within 120 seconds. The connection between the router and the DIR-270 will be
configured automatically.
INTERNET RADIO
From the main menu use the Navigation wheel(8) to select INTERNET RADIO and press the
Navigation wheel(8) to start.
button(6) to move
button (4)to go back and
10