Publicité
Les langues disponibles
Les langues disponibles
4.7 FEEDING TIMER:
The DBX-68 parent unit can emit a signal when it's time for your baby to be
fed. First you must set how many hours are in between feeding times:
1. tap button M to activate the menu
2. use the
and
buttons to select the option FEEDING TIME
3. tap button M
4. use the
and
buttons to select the time in between feeding times in
increments of half an hour
5. briefly press the
button to confirm your selection and to leave the
menu
•
you only have to set this time once, but you'll need to adjust it again
when the time in between feeding times changes or when you prefer to
turn this function off (by selecting 'off' in the above step 4)
Switching on the timer.
Attention: when only one baby unit is registered on the parent unit,
you may switch on the feeding timer via both the parent unit and the
baby unit. When multiple baby units are registered on the parent unit, you
can only switch on the feeding timer via the baby unit.
turn on the feeding timer on parent unit: (only possible when just one baby
unit is registered on the parent unit)
1. tap button M to activate the menu
2. use the
and
buttons to select the option START TIMER
3. tap button M to start the timer and to close the menu
•
the timer time you have set will now appear in the display directly
underneath the name 'BABY' (or the name you programmed yourself)
and will slowly count down
•
at 0.00 the unit will emit beep tones for up to 20 seconds while the text
'FEEDING TIME' appears in the display
turn on the feeding timer on baby unit:
1. tap button
to activate the alarm for the next feeding time, the unit will
emit 2 beep tones.
Attention: only when the baby unit is in communication with the
parent unit you can turn on the alarm for the next feeding time. If
you don't hear 2 beep tones after pressing the
between the baby unit and parent unit is lost. You can now speak into the
baby unit and press the
alarm via the parent unit.
4.8 TALKING BACK TO THE BABY UNIT:
1. Press the TALK button on the parent unit to talk back
to the baby unit.
2. Press and hold the button while talking and release
the button to listen.
3. Adjust the volume of the baby unit with the
baby unit itself
4.9 BELT CLIP:
The units are provided with a belt clip. Use it to suspend the unit or to carry
it on your clothing.
You may remove the belt clip by somewhat bending and opening one of the
ends.
43
button, the connection
button again or you can activate the feeding time
and
buttons on the
Publicité
