Publicité
Les langues disponibles
Les langues disponibles
English
10. TRANSPORT
Never lift or transport the rotary tiller while the engine
is running. It is necessary to always turn off the engine
when transporting the machine between different
working areas.
Once the machine is turned off, wait 5 minutes to
allow it to cool before transporting it. The machine's
exhaust pipe will remain hot after turning off the
engine.
To transport the machine, lower transport wheel and
rest the machine on it. Lift the handlebar with both
hands so that the milling cutters do not touch the
ground and push the machine so it moves onto the
transport wheel.
If you have to raise the machine, check the weight of
the machine in the technical characteristics before
lifting it to ensure that it is a weight that you can
withstand.
If you are transporting the rotary tiller in vehicles,
secure it firmly to prevent it from slipping or tipping
over.
11. STORAGE
Once the machine is off, wait 5 minutes for it to cool
down before storing the machine.
The machine's exhaust pipe will remain hot after
turning the engine off. Do not ever store the machine
in places near flammable materials (dried grass or
wood...), gas or fuels.
Be sure to store the machine in a place not accessible
to children or that it creates possible danger for
anyone and that is dry, clean and at a temperature
between 0 ° C and 45 ° C.
Before storing the machine follow the directions in the
maintenance chapter.
If you plan to store the machine in a closed place, first
empty the fuel. Vapors could come into contact with a
flame or hot body and ignite. If the fuel tank has to be
emptied, this must be done outdoors and according to
the regulations of recycling.
To reduce the risk of fire, keep the engine, muffler
and fuel tank clean by eliminating the remains of cut
material, oil and grease.
12. RECYCLING AND MACHINE
DISPOSAL
Protect the environment. Recycle this machine's used
oil by taking it to a recycling center. Do not pour used
oil in drains, land, rivers, lakes, or seas.
Dispose of your appliance sustainably.
We should not get rid of machines
with domestic waste. Plastic and metal
components can be classified according to their
nature and recycled.
The materials used to pack this machine
are recyclable. Please do not throw the
packaging away with domestic trash. Throw
these packages away at an official collection point.
54/172
Publicité
