Getac RX10 Manuel De Fonctionnement page 5

System Recovery
Windows 10 Models
Windows 10 has a recovery environment
(Windows RE) that provides recovery, repair,
and troubleshooting tools. The tools are
referred to as Advanced Startup Options. You
can access these options by selecting
Settings  Update & security. (See Microsoft
website for more information.)
NOTE:
• If you are in a situation where your
computer won't boot into Windows, you
can access the Advanced Startup Options
by running the BIOS Setup Utility and
selecting Advanced  Windows RE.
• When necessary, you can restore your
Windows 10 system to the factory default
state by using the "recovery partition"
feature. (Refer to the User Manual for
detailed information.)
Windows 7 Models
A "System Recovery" tool allows you to
restore the Windows 7 system to the factory
state.
To run System Recovery:
1. Connect the AC adapter.
2. Turn on the Tablet PC. During system
startup when the logo screen appears, tap
the screen or press the Windows Logo
button on your Tablet PC. In the pre-boot
menu that appears, select Recovery. (Tap
with your finger. Stylus is not supported
here.)
3. In the screen that appears, select Recovery
to start the recovery process.
4. The progress bar shows the percentage
completed. When it reaches 100%, the
system turns off.
5. Turn on the Tablet PC. The Windows setup
wizard starts. Follow the onscreen prompts
to continue.
6. When the system restarts, the installer
screen appears. The installer will perform
system hardware detection and driver
installation.
7. When completed, the system restarts and
displays Windows desktop.
Taking Care of the Tablet PC
Location Guidelines
•
For optimal performance, use the Tablet
PC where the recommended tempe-
rature is between 0 °C (32 °F) and 55 °C
(131 °F) – actual operating temperature
depending on product specifications.

•
Avoid placing the Tablet PC in a location
subject to high humidity, extreme tempe-
ratures, mechanical vibration, direct sun-
light, or heavy dust. Using in extreme
environments for long periods can result
in product deterioration and a shortened
product life.
•
Operating in an environment with metallic
dust is not allowed.
•
Place the Tablet PC on a flat and steady
surface. Do not stand the Tablet PC on its
side or store it in an upside-down position.
A strong impact by dropping or hitting
may damage the Tablet PC.
•
Do not cover or block any ventilation
openings on the Tablet PC. For example,
do not place the Tablet PC on a bed, sofa,
rug, or other similar surface. Otherwise,
overheating may occur that results in
damage to the Tablet PC.
•
As the Tablet PC can become very hot
during operation, keep it away from
objects that are vulnerable to heat.
•
Keep the Tablet PC at least 13 cm (5 inches)
away from electrical appliances that can
generate a strong magnetic field such as a
TV, refrigerator, motor, or a large audio
speaker.
•
Avoid moving the Tablet PC abruptly from
a cold to a warm place. A temperature
difference of more than 10 °C (18 °F) may
cause condensation inside the unit, which
may damage the storage media.
General Guidelines
•
Do not place heavy objects on top of the
Tablet PC as this may damage the display.
•
To avoid damaging the screen, do not
touch it with any sharp object.
3