Publicité
Les langues disponibles
Les langues disponibles
The messages shown below display your systems
condition.
EJECT:
No disc magazine has been loaded in the changer. The disc
magazine is not completely
➪ Load the disc magazine properly.
No CD in the unit.
➪ Insert the CD.
NO DISC:
No disc has been loaded in the disc
➪ Load a disc into the disc magazine.
E-04:
No disc has been loaded in the disc
➪ Load a disc into the disc magazine.
The CD is quite dirty. The CD is upside-down. The CD is
scratched a lot.
➪ Clean the CD and load it correctly.
E-05:
The CD is
upside-down.E05
➪ Load the CD correctly.
BLANK:
Nothing has been recorded on the
NO TRACK:
No tracks are recorded on the MD, although it has a
E-15:
Media was played that doesn't have data recorded that the
unit can play.
E15
➪ Use media that has data recorded that the unit can play.
NO PANEL:
The faceplate of the slave unit being connected to this unit
has been
removed.E30
➪ Replace it.
E-77:
The unit is malfunctioning for some
➪ Press the reset button on the unit. If the "E-77" code does
not disappear, consult your nearest service center.
E-99:
Something is wrong with the disc magazine. Or the unit is
malfunctioning for some
➪ Check the disc magazine. And then press the reset button
on the unit. If the "E-99" code does not disappear, consult
your nearest service center.
loaded.E01
magazine.E02
magazine.E04
MD.E10
title.E11
reason.E77
reason.E99
— 31 —
HOLD:
The protective circuit in the unit activates when the
temperature inside the automatic disc changer exceeds 60°C
(140°F), stopping all
➪ Cool down the unit by opening the windows or turning on
the air conditioner. As the temperature falls below 60°C
(140°F), the disc will start playing again.
NO NAME:
Attempted to display DNPS during the CD play having no disc
names
preset.E51
LOAD:
Discs are being exchanged in the Disc
READING:
The unit is reading the data on the
NO ACCES:
After setting it in the Disc Changer, DNPP was done without
having it been played at least 1
IN (Blink):
The CD player section is not operating
➪ Reinsert the CD. If the CD cannot be ejected or the display
continues to flash even when the CD has been properly
reinserted, please switch off the power and consult your
nearest service center.
UNSUPPRT:
A MP3/WMA is played with a format that this unit can't
support.E63
➪ ----
PROTECT:
A copy-protected file is
➪ ----
This is the privileged Microsoft® Windows Media Audio
file.
➪ ----
operation.E0d
changer.E57-1
disc.E57-2
time.E58
properly.E59
played.E64
Publicité
