Publicité
Les langues disponibles
Les langues disponibles
General features
Station/Disc Naming (SNPS/DNPS)
Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to attach a title to
• A title can't be attached to a MD.
• An external CD changer or an external CD player must be
connected for disc naming.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MENU" is displayed.
3
Select Name set mode
Press the [FM] or [AM] button.
Select the "NAME SET" display.
4
Enter Name set mode
Press the [4] or [¢] button for at least 2 seconds.
5
Move the cursor to the enter character position
Press the [4] or [¢] button.
6
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a numbers
buttons.
Example:If "DANCE" is entered.
Character
Button
"D"
[3]
"A"
[2]
"N"
[6]
"C"
[2]
"E"
[3]
7
Repeat steps 5 through 6 and enter the name.
8
Exit Name Set mode
Press the [MENU] button.
Times pressed
1
1
2
3
2
— 12 —
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- FM: 32 stations
- AM: 16 stations
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
• The title of station/CD can be changed by the same operation
used to name it.
Theft Deterrent Faceplate
The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
Press the Release button.
The faceplate is unlocked, allowing you to detach it.
• The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
• Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
1
Align the projections on the unit with the grooves on the
faceplate.
Publicité
