Panel Function Description - Uberhaus PC10-AMD Guide De L'utilisateur

PANEL FUNCTION DESCRIPTION

1. POWER KEY
Press to turn unit "ON" or "OFF".
2. FUNCTION SELECTOR
Press this key to select COOLING, HEATING, DEHUMIDIFICATION or FAN.
※ In dehumidifying mode, when "dh" is displayed, temperature cannot be set.
※ In fan mode, when "FF" is displayed, temperature cannot be set.
※ When in standby mode(off mode), press [mode] (function key) for 10
seconds to switch temperature from Celsius to Fahrenheit . (Note: default
setting is Celsius.)
3. TEMPERATURE CONTROL KEY (UP)
In cooling mode: This key increases the preset temperature by 1ºC each time it is pressed,
to a maximum of 30ºC (90ºF).
In heating mode: This key increases the preset temperature by 1ºC each time it is pressed,
to a maximum of 25ºC (80ºF).
5
4. TEMPERATURE CONTROL KEY (DOWN)
In cooling mode：This key lowers the preset temperature by 1ºC each time it is pressed, to a
minimum of 17ºC (65ºF).
In heating mode: This key lowers the preset temperature by 1ºC each time it is pressed, to a
minimum of 15ºC (60ºF).
5. LED DISPLAY
Indicates the temperature or the time setting. After any time is set, the display will return to the
preset set temperature.
6. SPEED
Press to select LOW, MEDIUM, HIGH or AUTO fan speed.
If "AUTO" is selected (in cooling mode),"HIGH" or "MEDIUM" or "LOW" will be selected
automatically according to the difference between setting temperature and room temperature.
Note: In heating and dehumidifying modes, the wind-speed setting cannot be changed
because
7. PROGRAMMABLE TIMER
Programmable timer ON/OFF key.
TIMER-ON: The timer-on is used to turn on the unit automatically after the a set amount of time.
1. Press "Timer" key in stand-by status (off mode) to set the time. After setting the time, then
choose the function you want (cooling, heating, dehumidifying, and fan mode (FF).
2. Once the set time has elapsed, the unit will turn on automatically.
3. If you press the "POWER" key before the set time elapses, the set time will be cancelled and the
unit will turn on.
※ After setting the time, the time display will flash for a few seconds. Please choose the function
after the flashing is stopped.
TIMER-OFF: The timer-off is used to turn off the unit automatically after the set amount of time has
elapsed.
6