Electrolux 88031 K-IN Notice D'utilisation page 8

8 Description of the Appliance
Control bar
The control bar is a special Touch Control field.
The control bar is touched where the de-
sired heat setting is positioned. The heat
setting is shown in the display. Correct to
the left or the right, if necessary.
Do not release before the desired heat set-
ting is reached.
3
If the control bar is touched for longer
than 6 seconds, a signal sounds and the
appliance switches itself off.
The induction cooking zones create the
heat required for cooking directly in the
base of the cookware. The glass ceramic is
merely heated by the residual heat of the cookware.
The cooling fan switches itself on and off depending upon the temperature of
the electronics.