Velleman DVR4L5 Guide D'installation Rapide page 7

• Press the cursor up (
enter to save and go to the next character, or use the mouse to select the desired value. Repeat
this for all four password numbers.
Note: default admin password is "0000" (4 times zero).
Record settings
• Press the MENU button and enter the password to go into the menu list.
• Select the QUICK START menu item.
• Select the GENERAL menu item using the NAVIGATION button.
• Set the image size, image quality and images per second for recording.
• Refer to the full user manual on the included CD-ROM for more details.
Audio playback
• Press the SLOW and ZOOM button simultaneously to select the desired audio channel or use the
quick menu bar (see below). The current audio channel is indicated in the status bar.
Switch users
• The DVR can be accessed as administrator (
bar.
• To switch between users, click on the user icon (
• Press on the key lock icon (
Video output
• When both a CRT monitor and a VGA screen are connected at the same time, by default, the DVR
will automatically revert to the VGA screen.
• To switch to the other display, go to ADVANCED CONFIG and set the DISPLAY OUTPUT PATH.
Note: the DVR must be reset for the setting to take effect.
• It is also possible to select a display at start-up of the DVR. Press the left key (
panel during start-up to use the CRT monitor; press the right key (
VGA output.
8. Operation
Display
The following image shows the screen layout.
live audio channel 1 .. 4 enabled
audio channel disabled
digital zoom on (yellow) / off
LAN connected / Internet connected / no network connection
USB flash drive connected
26/01/2010
DVR4L5
) or down ( ) button to select the value of the first number and press
) than enter the password of the desired profile.
) or operator ( ), icons are indicated in the status
or ) to lock the current session (
A system date and time
B general system status
C available HDD capacity
D channel status
playback audio channel 1 .. 4 enabled
(yellow)
timer recording
USB mouse connected
Hard disk overwrite (default)
7
).
) on the front
) during set-up to use the
©Velleman nv
Rev. 01