Publicité
Les langues disponibles
Les langues disponibles
English
12 After Finishing Work
12.1 Preparing for Transportation or Storage
To prepare the pressure washer for transportation or
storage:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Disconnect the pressure washer from the water supply.
► Press the spray gun trigger to relieve any remaining
pressure in the system.
► Lock the spray gun trigger.
► Disconnect the water hose.
► Remove and clean the nozzle and spray lance.
► Remove the spray gun and let the rest of the water run out
of the spray gun.
► If the pressure washer will be exposed to freezing
temperatures, protect it with antifreeze or take other
measures outlined below, @ 12.2.
► Clean the pressure washer.
26
1
7
6
► Wind up the high-pressure hose (1) and stow it on the
holder (2).
► Roll up the power supply cord (3) and hang it onto the
holder (2).
► Place the spray attachment in one of the holders (4).
► Secure the power supply cord with the clip (6).
► Insert the detergent spray set (5).
► Insert the nozzles (7).
12 After Finishing Work
2
3
4
5
0458-001-8221-A
Publicité
