Publicité
Les langues disponibles
Les langues disponibles
5 IMPORTANT SAFETY INSTRUCTIONS
￭ To reduce the risk of personal injury to the operator and
bystanders:
– Always switch off the pressure washer, relieve
system pressure, lock the spray gun trigger and
disconnect from the power supply before
assembling, inspecting, cleaning, maintaining or
servicing the pressure washer.
￭ Although certain unauthorized attachments may fit your
STIHL pressure washer, their use may be extremely
dangerous. Only attachments supplied by STIHL or
expressly approved by STIHL for use with this specific
model are recommended.
– Use only attachments supplied or expressly
approved by STIHL.
– Never modify this pressure washer in any way.
– Never attempt to modify or override the pressure
washer's controls or safety devices in any way.
– Never use a pressure washer that has been modified
or altered from its original design.
￭ If the pressure washer is dropped or subjected to similar
heavy impacts:
– Check that it is undamaged, in good condition and
functioning properly before continuing work.
– Check that the controls and safety devices are
working properly.
– Check that the power supply cord has not been
damaged.
– Never work with a damaged or malfunctioning
pressure washer. In case of doubt, have the
pressure washer checked by your authorized STIHL
servicing dealer.
0458-001-8221-A
￭ If the pressure washer is damaged, not working properly,
has been left outdoors or exposed to rain, its components
may no longer function properly and safety devices may
be inoperative. To reduce the risk of personal injury and
property damage:
– Take the pressure washer to your authorized STIHL
servicing dealer to be checked before further
operation.
￭ Genuine STIHL replacement parts are specifically
designed to match your pressure washer and meet safety
and performance requirements. Use of parts that are not
authorized or approved by STIHL may cause serious or
fatal injury or property damage.
– STIHL recommends that only identical STIHL
replacement parts be used.
5.6
Power Supply Cord
WARNING
￭ Using a damaged power supply cord or plug may result in
fire, electric shock and other personal injury or property
damage. To reduce these risks:
– Check the pressure washer's power
supply cord or plug regularly for damage.
If it becomes damaged, disconnect the
pressure washer from the power supply.
Never use a damaged power supply cord
or plug.
– Do not abrade, crush, jerk, or otherwise abuse or
misuse the power supply cord. Protect it from heat,
oil and sharp edges.
– If the power supply cord becomes damaged, have it
replaced by an authorized STIHL servicing dealer
before use. A damaged power supply cord must be
replaced with an identical STIHL replacement part.
– Unplug the power supply cord when the pressure
washer is not in use.
– Never yank or jerk the power supply cord to
disconnect. To unplug, grasp the plug, not the power
supply cord.
English
9
Publicité
