Publicité
Les langues disponibles
Les langues disponibles
8 Assembling the Pressure Washer
To connect the high-pressure hose:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Remove all sand and debris from the connections and
couplings.
2
1
► Push the high-pressure hose (1) into the pressure
washer (2).
► If the high-pressure hose is difficult to push into the
coupling, apply a food-safe fitting grease to the sealing
surface on the high pressure hose.
8.2.2
Removing the High-Pressure Hose
WARNING
To reduce the risk of severe injury from high-pressure spray,
always switch off the pressure washer, shut off the water
supply, relieve any remaining pressure in the system and
lock the spray gun trigger before attempting to remove the
high-pressure hose from the pump or spray gun.
To remove the high-pressure hose:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Pull the spray gun trigger to relieve pressure.
► Lock the spray gun trigger.
0458-001-8221-A
1
► Press down and hold the locking lever (2).
► Pull out the high-pressure hose (1).
8.3
Spray Gun and Lance
8.3.1
Connecting the Spray Gun and Lance
To connect the spray gun and lance:
► Switch off the pressure washer, @ 10.2.
► Disconnect the pressure washer from the power supply.
► Shut off the water supply.
► Lock the spray gun trigger.
► Remove all sand and debris from the connections and
couplings.
1
2
► Push the high-pressure hose (2) into the spray gun (1).
English
2
17
Publicité
