Panasonic NN-P295 Manuel D'instructions page 14

IP4431_38Q57CP_00_120912 2012.9.12
Selecting Power
& Cook Time
Example: To cook at P 6 (MEDIUM) power for 1 minute 30 seconds
1.
Press 5 times.
2.
3.
Press
once
twice
3 times
4 times
5 times
6 times
7 times
8 times
9 times
10 times
NOTES:
1. For more than one stage cooking, repeat steps 1 and 2 for
each stage of cooking before pressing Start Pad. The maxi-
mum number of stages for cooking is 5. When operating,
two beeps will sound between each stage. Five beeps will
sound at the end of the entire sequence.
2. When selecting P10 (HIGH) power for the first stage, you
may begin at step 2.
3. When selecting P10 (HIGH) power, the maximum program-
mable time is 30 minutes. For other power levels, the maxi-
mum time is 99 minutes and 99 seconds.
4. For reheating: use P10 (HIGH) for liquids, P7 (MED-HIGH)
for most foods and P6 (MEDIUM) for dense foods.
5. For defrosting, use P3 (MED-LOW).
DO NOT OVER COOK. This oven requires less time to cook
than an older unit. Over cooking will cause food to dry out and
may cause a fire. A microwave oven's cooking power tells you
the amount of microwave power available for cooking.
Setting the Clock
Example: To set 11:25 a.m. or p.m.
1.
2.
3.
9:58 AM Page 14
• Press Power Level until the desired
power level appears in the display
window.
• Set cooking time using number pads.
• Press Start.
➤Cooking will start. The time in the
display window will count down.
Power Level
P10 (HIGH)
P9
P8
P7 (MED-HIGH)
P6 (MED)
P5
P4
P3 (MED-LOW)/DEFROST
P2
P1 (LOW)
• Press Clock once.
➤Colon flashes.
• Enter time of day using the number
pads.
➤Time appears in the display window;
colon continues flashing.
• Press Clock.
➤Colon stops flashing; time of day is
entered.
NOTES:
1. To reset the clock, repeat steps 1-3.
2. The clock will retain the time of day as long as the oven is
plugged in and electricity is supplied.
3. Clock is a 12 hour display.
4. Oven will not operate while colon is flashing.
Quick Min Feature
This feature allows you to set or add cooking time in 1 minute
increments up to 10 minutes.
To Set Cooking Time:
1.
• Press Quick Min until the desired
cooking time (up to 10 minutes)
appears in the display window. Power
Level is pre-set at P10.
2.
• Press Start.
Cooking begins and the time will count
down. At the end of cooking, 5 beeps
sound.
NOTES:
1. If desired, you can use other power levels. Select desired
power level before setting cooking time.
2. After setting the time by using the Quick Min Pad, you
cannot use Number Pads.
3. Quick Min Pad can be used to add more time during
manual cooking. Check the Display Window to verify the
additional cooking time.
Keep Warm Feature
This feature will keep food warm for up to 30 minutes after
cooking.
Example: To keep 2 cups of gravy warm
1.
• Press Keep Warm.
2.
• Set warming time, up to 30 minutes.
to
3.
• Press Start.
➤Keep Warm will start. The time in
the display window will count down.
NOTES:
Keep Warm cannot be used in combination with sensor or
auto features.
12