RIDGID R5013 Manuel D'utilisation page 8

FEATURES
PRODUCT SPECIFICATIONS
Chuck Capacity ......................................................... 1/2 in.
Input ........................................120 V, 60 Hz, AC only, 7.5 A
Switch .......................................................... Variable Speed
kNOW YOUR HAMMER DRILL
See Figure 1, page 14.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
AUXILIARY HANDLE ASSEMBLY
Your drill is equipped with an auxiliary handle for ease of
operation and to prevent loss of control.
BLOWS PER MINUTE
This tool features an impact speed of 0-51,000 BPM (Blows
Per Minute). Blows Per Minute is the number of impacts per
minute.
CHUCk kEY
A chuck key has been provided for use when installing or
removing bits and removing the chuck. When not in use, the
chuck key can be placed in the chuck key holder.
ASSEMBLY
UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
Hammer Drill
Auxiliary Handle Assembly with Depth Stop Rod
Tool Bag
Chuck Key
Chuck Key Strap
Operator's Manual
Hammer Speed ........................................... 0-51,000 BPM
No Load Speed .................................. 0-2,700 r/min. (RPM)
Net Weight ................................................................. 5 lbs.
DEPTH STOP ROD
A depth stop rod has been supplied with this product to
assist in controlling the depth of drilled holes.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE)
Your drill has a direction of rotation (forward/reverse) selector
located above the switch trigger for changing the direction
of bit rotation.
LIGHTED PLUG
The lighted plug with tool icon helps to easily identify live
tools.
LOCk-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed with
increased trigger pressure and lower speed with decreased
trigger pressure.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Failure to
heed this warning could result in serious personal
injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
8 - English